The Advanced Guide To Fiat 500 Replacement Key Cost
Fiat 500 Replacement Key Fob
It might be time to change the battery if your 500 remote key fob isn't working. If you do replace the battery and it is still not working the issue is probably elsewhere.
At United Locksmith, we specialize in the creation of new keys for old automobiles. We have all of the necessary tools and parts for this service.
Dead Coin Battery
The most common reason why your Fiat 500 key fob will not lock or unlock the doors is due to a dead battery. The key fob is equipped with an internal battery called a coin cell that can quickly deplete when it isn't being frequently used. If your remote started to show signs of weakness like a loss of range and stopped working completely the battery could be dead.
The battery in the key fob is secured by metal retaining clips. If the clips are not secure, they could cause contact problems that will prevent your remote from receiving power. Use a flathead screwdriver pry open the retaining clip and remove the battery. Make sure to select a replacement with the same kind of voltage, size, and specification as the original battery.
Water exposure can cause the key fob to corrode or become damaged. Even a small bath in soapy, warm water could damage the chip. It is recommended to keep your key fob in a dry place.
Water Damage
Damage to your water supply could be the cause of your key fob's not functioning properly. Key fobs come with rubber seals to protect them from being damaged by light rain or a splash of water, however it is vital to keep your keys out of the ocean, pool, and washing machine!
The key fob contains an electronic chip that transmits a signal car's immobilizer system. The chip allows the 500 to be locked and started. If it gets wet, however it won't work.
If you want to check if your key fob is functional, you can clean the internal electronics using isopropyl or electronic cleaner. It is best to replace a key fob if it has been submerged into salt water rather than try to fix it yourself.
A replacement fob may cost you some money however it's much cheaper than having to have your fiat 500x key not detected 500 towed to a dealer and fixed there! You could also do it yourself by following only a few steps. Just make sure you have the right battery type before you attempt to open your key fob. This is a job that's far simpler than it appears and there are step-by-step instructions online for nearly every key fob for your car.
Faulty Chip
The chip located within the key fob communicates with your car's immobiliser unit to make sure your car is only able to start when the correct key is inserted. If the chip is damaged, or corrupted in any way the car won't start.
A chip that is damaged can happen due to a variety of reasons but the most common reason is water damage or a dead battery. It is best to delegate the job to a professional locksmith who can repair the chip in a short time and Fiat key fob at a an affordable price.
If your key fob stops working after exposure to clean tap water or rain, take off the battery and clean the electronic component using a paper towel to ensure it is fully dry before putting it back into. If the key fob will not function, there is an opportunity that it is a fried component and needs to be replaced.
Some people will turn to their dealer when they are in need of a new Fiat key fob, however this could be a expensive alternative. If you're seeking a cost-effective method to get your Fiat key fob fixed then look no further than United Locksmith. We have the tools and experience required to repair your Fiat key fob in a timely and professional manner.
Faulty Receiver Module
Fiat key fobs send a signal to the vehicle that can unlock and lock doors (and start the car if it has an automatic transmission) up to 50 feet. However, there are several things that could cause the fob to stop working. This includes a dead coin battery damaged by water, worn buttons and a receiver module issue, and signal interference or an electronic chip that is malfunctioning.
If the fob was in a pocket that has been subject to extreme trauma, such as being dropped on hard floors or being washed in a washer and it isn't capable of communicating with the car's Body Control Module (BCM). The BCM is a security system which will only accept signals from genuine keys.
It is necessary to replace the fob in case this occurs. A professional locksmith is able to handle every aspect of the key replacement process, including programming a new one for the 500. In fact, they can even provide you with a replica key that works just the same way as the original fob (and costs a fraction of the cost).